How To Use A Porcelain Tile Cutter Correctly

One of the most important parts of having porcelain tiles installed in your house is cutting them in correct proportions. For a clean cutting of the porcelain tiles, you need to make sure that you have the perfect tools to help you out. Having a porcelain tile cutter can really help in such cases.

When it comes to installation, there is nothing that can get worse than a badly cut tile. Not only does it affect the tiles but it also ruins the looks of the floor as well. So, you need to make sure that you have the perfect tool to help you out.

This post will tell you all about cutting porcelain tiles with the help of a porcelain tile cutter. Make sure that you follow this guide if you want to know a little bit more about the porcelain time cutters.

Tips To Help You Cut Porcelain Tiles Using A Tile Cutter

When it comes to cutting porcelain tiles, there are many methods for sure. However, it totally depends on the texture of the material that you are cutting. There are many types of porcelain tiles that require a tile cutter in order to finish the job. Not only are they more efficient in producing faster results but there are so many adjustments that can be made with the tile cutter. So, there is no doubt why anyone would want to use it.

Here we are going to discuss the things that you need to do in order to cut the porcelain tiles with the help of a tile cutter. Follow these steps and you will know all about cutting tiles with the help of a tile cutter.

1. Adjustment Of The Guide And Lock Of The Cutter

Before you even begin the process of cutting, you need to make sure that you have fully adjusted the lock of the porcelain tile cutter. Also, you need to focus on the guide of the tile cutter as well and make sure that it is adjusted properly to the type of the cut that you are going to make.

2. Place The Tile Properly

Another one of the most important things that you need to take care of is the placement of the tile. If the tile is not properly placed, then there are chances that the blade of the cutter will not be able to cut the tile properly. Also, you could even ruin your chances of having even pieces of the tiles. So, we would recommend that using a marker the mark the position where you are going to make a cut is really important. Apart from that, you also need to make sure that you put the cutter right on the tile’s edge.

3. Push Down And Slide The Cutter Across The Mark

After you are done with the marking, not you are all set to cut the tile. However, doing that requires a certain technique that most people don’t know about. As a result, they keep on making the same mistakes again and again. You need to push the cutter properly along the marked line all the while maintaining a steady hand. This can be a bit difficult for the beginners but with time you will get the hang of it.

4. Press Down When You Reach The End

After you see that you have reached the end point of the tile, you don’t just yank off the cutter as it might result in breaking the tile. You need to make sure that you push the cutter down so that you have an even piece of tile until the end. The pieces will be divided into two equal parts if you do that.

5. Smoothen Up The Edges

Although using a porcelain tile cutter would mean that you will get very smooth pieces of tiles to begin with, but you might have to use some other smoothening tools to smoothen the edges. This will make sure that if there is any sharpness, then it goes away effectively, giving you a proper and smooth piece of tile.

So, that is how you can easily use a porcelain tile cutter in order to cut your tile into smooth pieces. Make sure that you follow all these tips religiously if you want to have smooth surfaces altogether.…

Read More »